Click image to view full size image
GHOPTO SWIR camera is based on an in-house developed InGaAs detector with multiple resolutions.
The compact GH-SW640HS-Gnet meets requirements of high sensitivity in the SWIR range from 900nm to 1700nm and with accompanied by extended wavelength from 400nm to 1700nm options. The camera comes with PAL output and Gnet vision interface, allowing users to adjust settings such as exposure time, gain, and image acquisition mode.
The GH-SW640HS-Gnet InGaAs Camera is a powerful and versatile imaging solution that offers high performance, reliability, and ease of integration for a wide range of industrial and scientific applications.
The SWIR camera offers unique capabilities for various applications in Industrial inspections as nondestructive test, Si wafer inspection, semiconductor circuit detection, solar cell inspection, laser beam profiling, process monitoring, and spectral imaging.
|
TYPE |
GH-SW640HS-Gnet |
|
Array Type |
InGaAs |
|
FPA Format |
640 x 512 |
|
Spectral Response |
0.9 ~ 1.7 / 0.4 ~ 1.7μm( optional ) |
|
Pixel Pitch |
15μm |
|
Active Area |
9.6mm x 7.68mm |
|
Quantum Efficiency |
＞70%（1.0 ~ 1.6μm） |
|
Frame Rate |
100 Hz |
|
Integration Type |
snapshot |
|
Integration Time Range |
50 μs ~ 20 ms /100Hz maximum integral:9ms |
|
On-board Image Processing |
One/two-point correction、bad pixel replacement、image denoising 、image smoothing, controllable shutter compensation |
|
Operability |
＞99.5% |
|
Dynamic Range |
76 dB( linear mode ) |
|
Charge handing capacity |
1.7×104 e-（@HG,1.8V） |
|
ADC |
14bit |
|
Analog Output |
PAL、SMA |
|
Digital Output |
Gnet |
|
Image Acquisition |
GUI / SDK |
|
Trigger |
Trigger RS485（optional） |
|
Power Input |
DC 12V |
|
Power Consumption |
＜4W（noTEC） |
|
Lens Mount |
C-Mount |
|
Operating Temperature |
-20 ℃ ~ +50 ℃ / -40 ℃ ~ +60 ℃（optional） |
|
Storage Temperature |
-40 ℃ ~ +80 ℃ |
http://www.ghopto.com.cn/
E-mail: 